Click to Zoom
Lead Time
Shopping for a Client?
Unlock your trade benefits
Covered by the Sunglo warranty.
How can we help?
Contact us for assistance, a free design consultation or to order by phone.
Highlights
- Uses a manually operated control system requiring no electrical power
- Ideal for open patio designs
- 100% safety shutoff
- Heat coverage varies depending on the wind exposure on patio
Description
A Sunglo Natural Gas (NG) heater in Stainless Steel will provide you and your guests the warmth and comfort you need to enjoy your outdoor spaces all year long. The unit distributes radiant heat evenly via its 34" reflector to a twelve-foot diameter area. Order either the optional quick disconnect hose with valve or the optional standard disconnect hose for your unit and have the flexibility to move your unit where you need it most. (Take the added precaution of making sure the hose does not present a trip hazard.) This unit delivers 50,000/BTUs per hour and has a 100% safety shut off with a manually operated control system that does not need electricity to operate. This heater is commercial grade and ideal for restaurants, resorts, clubs and also high-end residential.
For assembly instructions, care, use and safety information please download the SunGlo A242 Manual. For specs and additional features download the SunGlo A242 Spec Sheet.
Product Protection
Your heater has been produced from highly weather resistant materials and only requires minimum cleaning and maintenance. Cleaning must be performed when the heater is cold. Your patio heater will last longer if it is cleaned and maintained properly. It is very important that the air required for the combustion process is not blocked going to the burner. Orifices, burner venturis, vents, and other openings must be kept free of dirt and spider webs.
Stainless steel does not "rust," however varying atmospheric conditions; areas with acid rain, beach and ocean areas with heavy misty conditions may leave brown deposits on the heater. This is to be expected of any stainless steel product used outdoors.
We recommend washing the outer stainless steel components such as the post and decorative cover and perforated material around the lighting instructions with a mild detergent solution and immediately wiping it clean with a dry soft cloth. The stainless steel can be expected to darken and discolor around the heater head and pan as it sustains extreme temperatures. This is normal and to be expected with any outdoor gas heating or cooking appliance.
Never use a cleaning agent that is flammable or corrosive. Never spray any cleaning product on the emitter grid or burner area. If you purchased a powder-coated model, treat it just like you would any other piece of fine outdoor patio furniture. Wash all painted parts of the heater with a soapy solution and protect it with a coat of automobile car wax a couple of times per year or as required dependent upon your local weather and climate conditions.
If you need to touch up a painted heater only paint the post and base portions. Never paint the emitter grid, lighting instructions, valve or control knob area, or the LP cylinder.
The burner ports must also be kept clear so that the burner burns evenly and the flow of gas is not restricted. If the heater is not performing adequately it will be necessary to check the burner and burner venturi. In a salt air or ocean environment, corrosion and rust occurs at a far greater rate than in non-ocean areas. You will need to more frequently check for corrosion and replace parts as required.
The best protection for the critical heater head is a cover that has been specifically designed for your heater. A stainless steel protective cleaner such as PGS Stainless Steel Cleaner will help protect the finish of all stainless steel components.
Stainless steel does not "rust," however varying atmospheric conditions; areas with acid rain, beach and ocean areas with heavy misty conditions may leave brown deposits on the heater. This is to be expected of any stainless steel product used outdoors.
We recommend washing the outer stainless steel components such as the post and decorative cover and perforated material around the lighting instructions with a mild detergent solution and immediately wiping it clean with a dry soft cloth. The stainless steel can be expected to darken and discolor around the heater head and pan as it sustains extreme temperatures. This is normal and to be expected with any outdoor gas heating or cooking appliance.
Never use a cleaning agent that is flammable or corrosive. Never spray any cleaning product on the emitter grid or burner area. If you purchased a powder-coated model, treat it just like you would any other piece of fine outdoor patio furniture. Wash all painted parts of the heater with a soapy solution and protect it with a coat of automobile car wax a couple of times per year or as required dependent upon your local weather and climate conditions.
If you need to touch up a painted heater only paint the post and base portions. Never paint the emitter grid, lighting instructions, valve or control knob area, or the LP cylinder.
The burner ports must also be kept clear so that the burner burns evenly and the flow of gas is not restricted. If the heater is not performing adequately it will be necessary to check the burner and burner venturi. In a salt air or ocean environment, corrosion and rust occurs at a far greater rate than in non-ocean areas. You will need to more frequently check for corrosion and replace parts as required.
The best protection for the critical heater head is a cover that has been specifically designed for your heater. A stainless steel protective cleaner such as PGS Stainless Steel Cleaner will help protect the finish of all stainless steel components.
Warranty
Limited Warranty
Heaters carry a 90-day commercial or one-year residential factory warranty. All heaters are stamped with the date of manufacture. Warranty is limited to repair of heaters at the factory or replacement parts. Any work or repair of this heater must be performed by qualified service personnel.
At A Glance
- warranty
- infrared heat
- Made in USA
- moderate assembly
- natural gas heating fuel
dimensions
Diameter | 34.50 in |
Height | 93.00 in |
Weight | 85.00 lbs |
Minimum Clearance | 18" from top, 24" from side |
Specifications
Heater Material | Stainless Steel |
Emitter Grid Material | Stainless Steel |
Heating Fuel | Natural Gas |
Ignition Type | Electronic |
Wheels | Without Wheels |
Heating Coverage Area | 113 sq ft |
Infrared Heat | Yes |
Mobility | Portable |
Patio Heater Type | Freestanding |
BTUs | 50,000 |
Hidden Tank (Y/N) | No |
Country of Origin | USA |
Assembly Required | Yes |
Level of Assembly | Moderate Assembly |
Why Choose Sun-Glo?
The original Sun-Glo patio heater was designed in 1961 by Edwin J. Cowan, a leading U.S. infrared heating appliance engineer. California had a unique demand for decorative yet practical gas-powered heaters. Cowan pioneered and developed the circular radiant heater concept primarily for use in country clubs, hotels, and restaurants.
Since then, the Sun-Glo heater’s design has been modified for a wide variety of uses. The Sun-Glo heater is now found in fine restaurants, covered and outdoor pools, spas, greenhouses, dining areas, and residential patios.
Using advanced heat distribution technology, Sun-Glo’s infrared patio heaters efficiently and effectively warm outdoor areas of all sizes. Sun-Glo’s durable stainless steel patio heaters feature modern silhouettes and are available in black and silver finishes. Much like the sun, infrared heat warms people and objects directly, rather than the air. This ensures quick and effective heating that is energy-efficient and allows you to enjoy your outdoor space even during the cooler months. Infrared heat also doesn’t “blow away” in windy conditions, which makes it ideal for breezy outdoor areas.
AuthenTEAK proudly offers free shipping on Sun-Glo patio heaters, with White Glove Delivery available. Our experienced team of experts is also available for free consultations to answer any design questions—from product information to spatial planning. AuthenTEAK’s award-winning showroom is located in Atlanta.
California Resident Proposition 65 Information
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65Warnings.ca.gov/
Ratings & Reviews
Do you own this product? Be the first to rate it.
Your feedback will help customers like you make informed decisions and will help us to improve our product offerings!
If you have any questions regarding the customer service you received, please contact us.